Answer: The installation of the backrest of the folding stool can be done by following these steps:1. Start by placing the backrest on a flat surface with the front side facing down.2. Align the holes on the backrest with the corresponding holes on the stool frame.3. Insert the screws provided into the holes and tighten them using a screwdriver or an Allen wrench.4. Make sure that the screws are securely fastened to ensure the stability of the backrest.5. Once the backrest is securely attached, flip the stool over and test the stability of the backrest by applying gentle pressure.Now, let’s dive into a detailed explanation of how to install the backrest of a folding stool.
Step 1: Prepare the necessary tools and materials
Before starting the installation process, gather all the tools and materials required. This may include screws, a screwdriver or an Allen wrench, and the backrest itself.
Step 2: Position the backrest
Place the backrest on a flat surface with the front side facing down. Ensure that the surface is clean and free from any debris that may interfere with the installation process.
Step 3: Align the holes
Align the holes on the backrest with the corresponding holes on the stool frame. The number of holes may vary depending on the design of the folding stool. Take your time to ensure that the holes are properly aligned before proceeding to the next step.
Step 4: Insert and tighten the screws
Insert the screws provided into the aligned holes. Use a screwdriver or an Allen wrench to tighten the screws. Start by loosely tightening the screws and then gradually tighten them further until they are securely fastened. Be careful not to overtighten the screws, as this may damage the backrest or the stool frame.
Step 5: Test the stability
Once the backrest is securely attached, flip the stool over and test the stability of the backrest. Apply gentle pressure to the backrest to ensure that it is firmly in place and does not wobble or move.